01938 553373

My Cart 0 Items: £0.00

Traffic Film Remover

Items 1 to 10 of 12 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
  1. Magnum Excel HD

    Code: EC71

    *A powerful, concentrated, alkaline pressure washer additive.

    * Designed with controlled foam levels to ensure a free-rinsing finish and effective degreasing action.

    * Suitable for removing heavy layers of traffic film, grease and dirt, and is ideally suited for removing built-up grease in the engine department

    * Use Magnum Excel HD in industry for cleaning all plant and equipment, lorries, tankers, and as an effective pre-MOT test cleaner on chassis and under body areas. Magnum Excell HD is recommended for cleaning vehicles involved in the transportation of meat and foodstuff, as it is non-tainting and odourless.

    £0.00
  2. HD Solvent Degreaser

    Code: EC119

    Coldwash HD is a heavy duty degreaser based on petroleum solvents, emulsifying agents and surfactants. This product is excellent for use on soiled surfaces, bilges and machinery parts. Features Emulsifying agents are biologically degradable Does not contain nonyl phenol ethoxylates or other estrogenic compounds effective on mineral oils and petroleum based residues Safe to use on most metal surfaces and painted surfaces Removes oil contamination from machinery, engine parts and bilges

    Powerful degreaser with quick penetration and good emulsifying properties. The emulsifying agents in this product are biological degradable. Does not contain nonyl phenol ethoxylates or other estrogenic compounds. Effective on mineral oils and petroleum based residues. Safe to use on most metal surfaces and painted surfaces. Removes oil contamination from machinery, engine parts and bilges. Soak cleaning of machinery parts. Rapid rinsing, leaves clean and oil-free surfaces.

    DIRECTIONS

    This product is excellent for use on soiled surfaces, bilges and machinery parts.

    This degreaser must be applied neat with a brush, by hand spray, immersion, soaking etc. The contact, or soaking, time should be between 15 minutes to 2 hours before washing off with hot or cold water. Hot water will improve the result of the cleaning.

    Spot cleaning

    Spray neat Coldwash HD onto surfaces to be cleaned. The contact time should be at least 30 minutes or up to 2 hours if time allows. Bulkheads/walls can be washed down by use of high pressure cleaning machines. The best result is achieved with hot water between 60–80°C.

    Spray method

    Spray Coldwash HD neat onto soiled surfaces. The contact time should be between 15–30 minutes, and then wash off with water. To clean stubborn deposits, mechanical agitation such as scrubbing will improve the cleaning.

    Soak method

    Immerse the parts to be cleaned into a bath of neat Coldwash HD for 30 minutes, and then wash off with water.

    £0.00
  3. Tar & Glue Remover

    Code: EC120

    The best product for the job, safe to use on all paints and trim.

    Removes tar and adhesive trim marks.

    NOTE: you dont require much product to do the job....its very strong.

    DIRECTION

    Simply spray or wipe on and allow 30 secomds to soak in, wipe off and then wash with clean water.

    £0.00
  4. Curtain Sider T.F.R

    Code: EC82

    The ultimate in performance for non-streak curtain tautliner washing and general transport applications. It will cling to surfaces, providing better contact times, improved cleaning and greater economy. Ideal for all vehicle types and curtain sided materials.
    £0.00
  5. Transport 7000

    Code: EC69

    Developed for both hot and cold pressure wash applications Fast acting, free rinsing Highly concentrated for economy in use. Suitable for use in hard or soft water. Safe for septic and all collection tanks. Can be used on cars, trucks, coaches or anything that requires safe washing techniques.

    DIRECTIONS

    Pre-dilute with up to : 1:8 parts water - light soiling 1:4 parts water - heavy soiling 1:2 parts water - chassis cleaning prior to pouring into detergent feed tank. Adjust feed rate as required, typical final dilution 2%. Lightly spray vehicle and allow to soak for up to 5 minutes.

    Rinse thoroughly using high pressure spray. N.B. Do not use on aluminium or galvanised surfaces. Do not allow the product residue to dry out on the vehicle or staining may occur. Always rinse thoroughly after use.

    £0.00
  6. V-clean TFR + Polish

    Code: EC72

    TRAFFIC FILM REMOVER WITH POLISH

    A powerful effective pressure washer additive that will remove traffic film and leave a protective shine coating.

    V172 has a controlled foam level to ensure a free-rinsing finish and effective degreasing cleaning power.

    Suitable to remove traffic film, grease and dirt from all makes of cars, vans, lorries, tankers, curtain-sided and commercial vehicles. V172 is an alkaline cleaner, ideally suited to the regular cleaning of fleet vehicles.

    *Cleans and waxes in one operation

    *Silicone free

    *Concentrated for economy in use

    DIRECTIONS:

    Dilute with water according to the area to be cleaned. Pre-dilute TFR & POLISH before filling the detergent feed tank. Adjust the detergent feed rate to achieve the cleaning action required. Apply to the surface using pressure washer equipment and then rinse off immediately with plenty of clean water.

    N.B. DO NOT ALLOW TFR & POLISH TO DRY OUT ONTO SURFACE OR STAINING MAY RESULT.

    N.B. NOT TO BE USED ON ALUMINIUM. Dilution Rates:

    TFR & POLISH : WATER

    Heavy Soil 1:20

    Medium Soil 1:50

    Light Soil 1:100

    £0.00
  7. Citrus Degreaser

    Code: EC444

    Citrus degreaser is a citrus based degreaser that easily removes oils and grease on contact.

    A premium blend of citrus based solvents, which emulsify with water or easy cleaning and rinsing.

    An extremely efficient degreaser for the removal of grease, oils, cutting oils, mineral oils, vegetable fats, animal fats, inks, diesel, tar deposits, rubber, wax and asphalt. Developed for use on all metals, concrete, stone and in engineering and industrial areas.

    • Easily removes all types of grease 
    • Citrus fragrance 
    • Chlorinated chemical FREE 

    DIRECTIONS:

    Apply using a brush, spray or cloth. Rinse thoroughly after cleaning. Suitable for dip tank use.

    HELP ZONE:

    N.B. Always test the resistance and suitability of the surface to be cleaned before application.

    £0.00
  8. QFX-Grit Guard Buckets

    Code: EC417

    The QFX-Grit Guard 20lt dual bucket washing system is an effective cleaning system that includes two heavy duty 20lt Grit Guard Wash Buckets, grit guard Inserts that remove grit out of harms way to a safe zone. This convenient system is perfect for all wash application using sponge or mitt method.

    Designed to help prevent swirl marks and scratches while washing your vehicle. The QFX system is ideal for keeping your wash mitt clean and free of contaminants. Use the first bucket to rinse the mitt or brush before putting it in the clean, soapy water bucket.

    £0.00
  9. QFX-Citrus Pre Wash

    Code: EC411

    QFX-Citrus Wash is a highly concentrated pre wash.

    Designed specifically to lift dirt, road grime and salts that adhere to the vehicles paintwork. QFX-Citrus can be be used as a pre wash before snow foam or any wash shampoo.

    FEATURES AND BENEFITS:

    • Concentrated Formula
    • Multi use purpose
    • Amazing cleaning power

    DIRECTIONS:

    Dilute wash 1;150 for a moderately soiled car 1:300 for light soiling.

    Approx 4:1 for oil or grease

    Apply to all areas, leave to dwell and pressure rinse away. Do not allow to dry.

    QFX-Citrus pre wash can be applied via a pump sprayer, trigger bottle or snow foam lance.

    HELP ZONE:

    TEST FOR SURFACE SENSITIVITY FIRST and NEVER ALLOW TO DRY, Do not use on aluminium, Zinc or other alkali-sensitive surfaces

    £0.00
  10. Alloy Wheel Cleaner

    Code: EC147

    An effective mild phosphoric acid product for the rapid safe removal of brake dust and road salts from alloy wheels.

    Professional alloy wheel cleaner that have been specifically designed to make cleaning alloys simple and effective. 

    DIRECTIONS

    It can be used neat for stubborn staining but can also be diluted up to 1:3 for less stubborn stains

    For optimum performance rinse using a pressure washer or powerful hose.

    Spray on and allow to penetrate. Brush in with and spray off with clean water.

    £0.00

Items 1 to 10 of 12 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction