01938 553373

My Cart 0 Items: £0.00

Floor Maintainer

10 Item(s)

per page

Set Descending Direction
  1. No Rinse Stripper (NRS)

    Code: EC196

    No Rinse Stripper NRS is a clear, water-based stripper to remove metallised and nonmetallised floor polishes.

    Highly researched graded technology uses a caustic-free formula taht reduces the risk of ongoing floor polish problems and uses advanced rinse-free materials formulated to reduce preparation time.

    Used to remove metallised and non-metallised floor polishes from PVC, thermoplastic, rubber, marble and terrazzo, PVC, Rubber, Marble.

    Non-rinse formulation - reduces labour cost and time

    Easily removes heavy build-up of polish

    Suitable for mop or machine application

    DIRECTIONS:

    Test for surface compatibility before use. Always brush floor to remove debris before application. Always dilute NRS with water according the required usage and apply to the floor with a mop or trigger spray. Allow approx 10 minutes contact time, then agitate using a scrubbing pad and mop or extract as much slurry from the floor as possible.

    N.B. May alter the colour of wood or linoleum floors. Some varnishes may be softened or removed. Always test surface compatability prior to application.

    NRS : WATER

    Normal Use 1:5

    Heavy Build- Up 1:3

    Machine Strip 1:5

    Spray Strip 1:5

    £0.00
  2. Non Skid Deck Cleaner

    Code: EC303

    Non skid Deck Cleaner A specially formulated deck cleaner for non slip decks.

    Designed to remove grime that gets into the hard to reach grooves.

    100% BioDegradable

    £0.00
  3. Quik Clean M.S.C

    Code: EC293

    Quik Clean Multi Surface Cleaner

    A safe multi surface cleaner, which cleans, freshens and enhances all hard surfaces without leaving a residue.

    A blue liquid with a fresh fragrance and a controlled foam level for easy application, Quik Clean M.S.C is ideal for the daily cleaning of general interior surfaces such as desks, chairs, windows, doors, etc.- Controlled foam for fast application

    - Enhances the appearance of surfaces

    - Cleans effectively, leaving a lasting, fresh fragrance

    DILUTION RATIO WITH WARM WATER

    600ml Trigger = 30ml of M.S.C

    5lt bucket = 4 x 30ml of M.S.C

    Apply diluted solution using a cloth or trigger spray, work into surface and then rinse or wipe clean.

    £0.00
  4. Microbac 7

    Code: EC277

    Highy advanced antimicrobial cleaning concentrate for carpets, fabrics and hard surfaces. Active Bactericide, fungicide, algicide, viricide, Bacteria including - E coli, MRSA, Listeria, Salmonella, Legionella.

    Solutions should always be freshly prepared.

    Always wear protective gloves, overalls, mask and eye protection.

    NEVER MIX MICROBAC WITH OTHER DETERGENTS.

    £0.00
  5. Multi surface cleaner

    Code: EC169

    Multi surface cleaner is recommended for use on all vanity units, sinks and shower trays and toilets also great on metals, plastics, rubber, glass, paints and fabrics. MSC helps to control and reduce bacteria while it cleans away the most stubborn stains. MSC deodorises and provides a barrier against the build up of bacteria.
    £0.00
  6. Floor Polish Stripper XL (FPS)

    Code: EC195

    This alkaline-based floor stripper will remove even aged on polish film. Formulated to give a low odour,floor stripper, free from harsh solvents and ammonia that produces a clean base for a new application of polish to be applied to.

    Works well on both metallised and non-metallised floor polishes. Perfect to strip emulsion polish from linoleum, thermoplastic floors, PVC/Vinyl, rubber, sealed wood, Laminate and terrazzo.

    Fast action - quickly penetrates polish films

    Pleasant floral fragrance

    Biodegradable and phosphate free

    DIRECTIONS:

    FPS should be diluted at 1 part to 10 parts of cold or warm water, then applied to the floor and given up to 15 minutes to soak on. After this soak on period, scrub the floor thoroughly with a scrubbing machine fixed with a nylon scrubbing pad or alternatively a stiff brush will suffice. This solution should then be removed from the floor by either mopping or by using a suction drier.

    Before any polish can be re-applied the area should be thoroughly rinsed with clean water and allowed to dry. FPS can be used undiluted by hand for removal of polish build-up in difficult areas, ie. around the edges of rooms. Apply FPS sparingly over a small area at a time, scrub the surface until the polish is loosened then rinse with plenty of clean water. A second application may be necessary for heavy build-up.

    FPS : WATER

    Rapid Action 1:10

    Normal Action 1:20

    £0.00
  7. Polytech 7 Floor maintainer

    Code: EC198

    Polytech 7 is an advanced floor maintainer that re-coats and repairs floors to leave a flexible, slip resistant finish. Keeps floors at the peak of their appearance and restores those that are losing their shine.

    Polytech 7 is a fragrant, low viscosity, opaque, pinky-coloured liquid that can either be applied by mop and left to dry or used through spray cleaning equipment.

    Suitable for use on marble, terrazzo, linoleum, vinyl, rubber, tiles, stone, sealed wood and sealed cork.

    Great gloss finish

    Repairs scratched, marked and worn areas

    Fantastic cleaning results

    DIRECTIONS:

    Shake before use and dilute according to the job. Always brush floor to remove loose debris prior to application.DAMP MOPPING - Apply Polytech 7 solution using a mop, agitate and remove any excess liquid .Allow the floor to dry. Machine burnish for a high gloss.

    POLYTECH 7:WATER

    DAMP MOPPING 1:20

    SPRAY BURNISHING 1:10

    £0.00
  8. Lemon Floor Gel (LFG)

    Code: EC199

    LFG is a high concentrated, low foaming hard surface cleaner and maintainer for regular daily use. This viscous yellow liquid gel, which contains natural citrus oils to leave a long lasting fresh lemon fragrance in the air.

    Suitable for use on all flooring and surfaces including; linoleum, thermoplastic floors, sealed cork, terrazzo, marble, sealed wood, vinyl, concrete and ceramic tiles.

    Fresh, lemon zesty fragrance

    Cleans and shines in one operation

    Thick formulation - ease to use

    DIRECTIONS:

    GENERAL CLEANING: Use diluted with up to 120 parts hot or cold water, and rinse away with clean water after cleaning.

    FLOOR CLEANING AND MAINTENANCE: Dilute 1 part LFG with 120 parts clean water. Mop the floor, allow to dry and machine buff to a high gloss finish.

    Alternatively, spray solution of LFG onto the floor and burnish with a spray cleaning pad.

    LFG : WATER 1:120

    £0.00
  9. General Floor Maintainer (GFM)

    Code: EC197

    GFM liquid floor maintainer makes use of advanced polymeric wax technology. The solvent-free formula contains the effective bactericide Benzalkonium Chloride which help to kill and maintain a clean surface.

    Easily removes soiling and scuff marks from the floor and should be used with a burnishing machine to produce a slip-resistant finish.

    For use on vinyl, thermoplastic, linoleum, rubber, asphalt, terrazzo, marble, sealed and unsealed wood, painted surfaces and stone.

    Suitable for use in a wide variety of areas, including schools, offices, shops, airports, bars, village halls, etc.

    Burnishes to a slip-resistant shine

    Cleans and shines quickly - saves time and money

    Leaves a fresh, fragrant atmosphere

    DIRECTIONS:

    Spray cleaning/burnishing - sweep the floor first, dilute GFM. 1 part to 8 parts water in a hand sprayer.Damp mopping for heavily soiled floors dilute 1 part GFM. to 15 parts water. Apply GFM solution, clean up with a mop and allow the floor to dry, then burnish the floor with a polishing machine.

    N.B. GFM may seperate, please shake the container before use and always burnish with a polishing machine after each application.

    GFM : WATER Spray cleaning 1 : 8

    Damp mopping 1 : 15

    £0.00
  10. CF600 Floor Maintainer

    Code: EC306

    A neutral cleaner for the cleaning and maintenance of floors, designed for use through any dosing systems. CF600 produces a fresh, spicy fragrance and builds gloss if used daily.

    Suitable for use on all polished and some non-polished floors, CF600 is effective against dirt, grime and rubber scuff marks. Use on marble, terrazzo, vinyl, thermoplastics, rubber and sealed wood.

    Cleans and repairs polish films 

    Versatile -suitable for spray cleaning or damp mopping - Neutral - can be used on most floor types

    DIRECTIONS

    Prepare a trigger spray or bucket of CF600 solution through the Ultra Blend 4 or the Ultra Dose system.

    Can be used for spray cleaning, maintaining or damp mopping.

    For optimum results, machine burnish with a suitable burnishing pad.

    £0.00

10 Item(s)

per page

Set Descending Direction