01938 553373

My Cart 0 Items: £0.00

High Gloss Floor Polish

4 Item(s)

per page

Set Descending Direction
  1. Vibrant Xtra (25% solids)

    Code: EC192

    Advanced acrylic polymer-based metallised floor polish, which dries to a fantastic wet look finish.

    Vibrant Xtra offers gloss, ultimate durability, and the perfect base to clean, protect and prolong the life of a floor.

    Suitable for use on non-porous floors, sealed cork, marble and terrazzo. also including; vinyl, rubber, linoleum, thermoplastic, asphalt, sealed wood. Used within for schools, colleges, hotels, offices, airports, factories, shops, shopping centers, bars,and pubs.

    £0.00
  2. VIBRANT ACRYLIC FLOOR POLISH (25%)

    Code: EC194

    A high quality acrylic polymer-based metallised floor polish, which dries to a high level deep gloss, excellent slip resistance qualities

    Vibrant protects and helps to prolong the life of flooring materials. Vibrant contains super high solids polish that produces a low maintenance, durable finish.

    Can be used on non-porous floors, including; vinyl, thermoplastic, linoleum, rubber, asphalt, sealed wood, marble and terrazzo.

    Sold to a varied sector of industries including hospitals and wards, schools, offices, shops, airports, village halls, etc.

    High grade quality shine for improved appearance

    Thermoplastic polymer protects the floor

    Builds good slip-resistance - no health and safety concerns

    DIRECTIONS:

    PREPARATION: To obtain best results, it is important that thorough preparation of the floor is undertaken. The floor must be thoroughly cleaned to remove all dirt, grease and old polish films by using a quality polish remover. The floor must be well rinsed with water and allowed to dry before applying Vibrant. APPLICATION: Apply a thin film of Vibrant (undiluted) using a mop or polish applicator. Drying time is normally around 30 minutes. Apply a second coat and allow to dry. Coverage is dependent on the porosity of the floor covering. On average, 5 litres of Vibrant will cover approximately 250/300 square metres of floor.

    Suitabe for use on the following

    Linoleum, PVC, Vinyl, Rubber, Laminate, Sealed wood, Marble

    £0.00
  3. No Rinse Stripper (NRS)

    Code: EC196

    No Rinse Stripper NRS is a clear, water-based stripper to remove metallised and nonmetallised floor polishes.

    Highly researched graded technology uses a caustic-free formula taht reduces the risk of ongoing floor polish problems and uses advanced rinse-free materials formulated to reduce preparation time.

    Used to remove metallised and non-metallised floor polishes from PVC, thermoplastic, rubber, marble and terrazzo, PVC, Rubber, Marble.

    Non-rinse formulation - reduces labour cost and time

    Easily removes heavy build-up of polish

    Suitable for mop or machine application

    DIRECTIONS:

    Test for surface compatibility before use. Always brush floor to remove debris before application. Always dilute NRS with water according the required usage and apply to the floor with a mop or trigger spray. Allow approx 10 minutes contact time, then agitate using a scrubbing pad and mop or extract as much slurry from the floor as possible.

    N.B. May alter the colour of wood or linoleum floors. Some varnishes may be softened or removed. Always test surface compatability prior to application.

    NRS : WATER

    Normal Use 1:5

    Heavy Build- Up 1:3

    Machine Strip 1:5

    Spray Strip 1:5

    £0.00
  4. Floor Polish Stripper XL (FPS)

    Code: EC195

    This alkaline-based floor stripper will remove even aged on polish film. Formulated to give a low odour,floor stripper, free from harsh solvents and ammonia that produces a clean base for a new application of polish to be applied to.

    Works well on both metallised and non-metallised floor polishes. Perfect to strip emulsion polish from linoleum, thermoplastic floors, PVC/Vinyl, rubber, sealed wood, Laminate and terrazzo.

    Fast action - quickly penetrates polish films

    Pleasant floral fragrance

    Biodegradable and phosphate free

    DIRECTIONS:

    FPS should be diluted at 1 part to 10 parts of cold or warm water, then applied to the floor and given up to 15 minutes to soak on. After this soak on period, scrub the floor thoroughly with a scrubbing machine fixed with a nylon scrubbing pad or alternatively a stiff brush will suffice. This solution should then be removed from the floor by either mopping or by using a suction drier.

    Before any polish can be re-applied the area should be thoroughly rinsed with clean water and allowed to dry. FPS can be used undiluted by hand for removal of polish build-up in difficult areas, ie. around the edges of rooms. Apply FPS sparingly over a small area at a time, scrub the surface until the polish is loosened then rinse with plenty of clean water. A second application may be necessary for heavy build-up.

    FPS : WATER

    Rapid Action 1:10

    Normal Action 1:20

    £0.00

4 Item(s)

per page

Set Descending Direction