Traffic Film Remover
V-Clean V179 Non caustic TFR BEST SELLER
CAUSTIC FREE TRAFFIC FILM REMOVER
A caustic-free traffic film remover with a pH value of 10.5 that is mild on surfaces, yet removes heavy soiling rapidly.
This concentrated blend of graded surfactants with class 8 corrosion inhibitors, designed to remove traffic film, oil and grease from vehicles.
Used throughout the valet industry as a safer, alternative traffic film remover throughout the car valeting industry.
Caustic free - pH 10.5 when undiluted
Mild on surfaces
Low odour - user-friendly
DIRECTIONS:
Check surface compatibility prior to application.
PRESSURE WASHER: - Adjust the detergent feed according to the level of soiling of the surface to be cleaned. Rinse off thoroughly with water.
LOW PRESSURE SPRAY - Apply diluted solution and allow 2-5 minutes contact time. Rinse off thoroughly with hot or cold water.
Pressure Washer Non caustic TFR would normally be diluted with water before use:Vehicle bodywork: 1 part Non caustic TFR - 4 parts water. Chassis cleaning: 1 part Non caustic TFR - 1 part water. Adjust the detergent feed rate as required, but always try and ensure that this is kept to a minimum whilst maintaining the desired cleaning action. Lightly pre-spray the whole vehicle before removing soil and traffic film using even sweeps of the lance at high pressure and at temperatures up to 70C. Turn off the detergent feed and thoroughly rinse the vehicle. CAUTION: Product must always be tested on alkali sensitive surfaces before use. Never use this product in direct sunlight or allow the product to dry out on the surface or staining may result.
Curtain Sider T.F.R BEST SELLER
The ultimate in performance for non-streak curtain sider washing and general transport applications. It will cling to surfaces, providing better contact times, improved cleaning and greater economy. Ideal for all vehicle types and curtain sider materials.
Transport 7000
Developed for both hot and cold pressure wash applications Fast acting, free rinsing Highly concentrated for economy in use. Suitable for use in hard or soft water. Safe for septic and all collection tanks. Can be used on cars, trucks, coaches or anything that requires safe washing techniques.
DIRECTIONS
Pre-dilute with up to : 1:8 parts water - light soiling 1:4 parts water - heavy soiling 1:2 parts water - chassis cleaning prior to pouring into detergent feed tank. Adjust feed rate as required, typical final dilution 2%. Lightly spray vehicle and allow to soak for up to 5 minutes. Rinse thoroughly using high pressure spray. N.B. Do not use on aluminium or galvanised surfaces. Do not allow the product residue to dry out on the vehicle or staining may occur. Always rinse thoroughly after use.
Magnum Excel HD
*A powerful, concentrated, alkaline pressure washer additive.
* Designed with controlled foam levels to ensure a free-rinsing finish and effective degreasing action.
* Suitable for removing heavy layers of traffic film, grease and dirt, and is ideally suited for removing built-up grease in the engine department
* Use Magnum Excel HD in industry for cleaning all plant and equipment, lorries, tankers, and as an effective pre-MOT test cleaner on chassis and under body areas. Magnum Excell HD is recommended for cleaning vehicles involved in the transportation of meat and foodstuff, as it is non-tainting and odourless.
V-clean V172 TFR + Polish
TRAFFIC FILM REMOVER WITH POLISH
A powerful effective pressure washer additive that will remove traffic film and leave a protective shine coating.
V172 has a controlled foam level to ensure a free-rinsing finish and effective degreasing cleaning power.
Suitable to remove traffic film, grease and dirt from all makes of cars, vans, lorries, tankers, curtain-sided and commercial vehicles. V172 is an alkaline cleaner, ideally suited to the regular cleaning of fleet vehicles.
*Cleans and waxes in one operation
*Silicone free
*Concentrated for economy in use
DIRECTIONS:
Dilute with water according to the area to be cleaned. Pre-dilute TFR & POLISH before filling the detergent feed tank. Adjust the detergent feed rate to achieve the cleaning action required. Apply to the surface using pressure washer equipment and then rinse off immediately with plenty of clean water.
N.B. DO NOT ALLOW TFR & POLISH TO DRY OUT ONTO SURFACE OR STAINING MAY RESULT.
N.B. NOT TO BE USED ON ALUMINIUM. Dilution Rates:
TFR & POLISH : WATER
Heavy Soil 1:20
Medium Soil 1:50
Light Soil 1:100
V-Clean V174 High Foam TFR
V174 has been specifically formulated for use with foam generating lance but with the option of use in a standard pressure wash system . This product uses powerful soaps to cling to the cars paint, emulsifying road film and salts as it slowly slides down the vehicle. Safe on all paint types and curtain sided trucks.
Super Green TFR
Super green TFR cleaner for use with all pressure wash equipment. Contains no caustic alkali, no NTA, no nonyl-phenol detergents, no phosphates just green cleaning power. Use at between 1 and 5% dilution through pressure cleaning equipment for a fantastic result every time. Simply vary the dilution in relation to the season/amount of road grime contamination.
©2002-2004 EUROCHEM
Copyright Notice | Privacy Policy | Terms & Conditions
