WHEELS
-
CERAMIC FX - Alloy Armour
Code: EC404
CERAMIC FX - Alloy Armour uses our unique Therma-Tech resins and advanced polysiloxane in this formula. Easy to apply solution that coats and seals alloy wheels with a durable heat and grime repellent sealant to help stop brake dust and road salts build up. Wheels treated with Alloy Armour are much easier to clean and maintain.
- Benefits and Special Features:
- Simple to use formulation
- Easy-on formula
Alloy Armour helps protect from brake dust fallout
Helps cleaning wheels much easier
DIRECTIONS:
Clean wheels thoroughly before application
HELP ZONE:
Do not apply to hot wheels
-
QFX-101 All Purpose Cleaner
Code: EC406
QFX-101 ALL PURPOSE CLEANER
All purpose cleaner is an effective cleeaner for hard surfaces, painted surfaces, wheels and plant and manufacturing equipment.
Use to deep clean areas such as headlinings, plastics, door panels and fabrics.
Pleasant fragrance and combined odour control additives help to remove bad odours.
FEATURES AND BENEFITS:
- Solvent-free formulation
- cleans quickly & safely.
- Highly effective on grease, oil, soot, brake dust and ink.
- Safe on paintwork,
- Perfect for rubber, glass, fabric, plastic & vinyl surfaces.
DIRECTIONS
Apply by spray, mop, sponge or brush. Allow to dwell. Agitate if necessary and rinse with water.
Dilutions:
Degreasing Hot: 1:20 Cold 1:8 General cleaning Hot 1:50 Cold 1:30, wheel cleaning & polymer removal 1:5
HELP ZONE:
DO NOT ALLOW TO DRY ON SURFACE
-
QFX- Bleeding Iron
Code: EC412
Bleeding Iron Fallout Remover is an advanced tech grade fallout remover formula that will remove iron contaminates from your auto paint work and wheels.
Bleeding Iron Fallout Remover will safely dissolve iron particles on contact turning all iron particle contamination purple upon a timely reaction period.
Bleeding Iron Fallout Remover is safe to use on all exterior surfaces including paintwork and wheels.
FEATURES AND BENEFITS:
Tech Grade
Fast Reacting Formula
Safe On All Surfaces
DIRECTIONS:
Spray onto the affected surface liberally, any iron contaminates will be easily dissolved into a purple solution once the reaction has taken place thoroughly rinse the surface with pressured water. When using for wheel cleaning, we recommend agitating a wheel detailing brush to increase coverage. Do not allow to dry on paintwork or wheels
HELP ZONE:
For best results agitate and apply second coating
If no bleeding happens your wheels are probably clean
-
QFX-TYRE GLOSS
Code: EC420
QFX-TYRE GLOSS enhances and adds gloss to the appearance of rubber, vinyl and plastic trim on vehicles.
Contains highly sophisticated graded silicone oils to produce a clean, long lasting sheen.
Can be used on:
Tyre walls
Plastic
Bumpers
Rubber
Leaves a new look finish on tyre walls delicately perfumed.
DIRECTIONS:
Ensure the surface is clean and dry before applying. Apply a thin film evenly over the whole surface using a brush, cloth or spray. Leave to dry. If desired, re-apply on areas of higher absorbency. N.B. Do not use on foot controls or steering wheel. Wipe off any excess off tyre treads.
HELPZONE:
Do not use outside in windy conditions
-
QFX- TAR n GLUE
Code: EC426
QFX-TAR n GLUE is a strong solvent based formula that will rapidly dissolve tar and glue deposits on contact. QFX-TnG is safe to use on all paint & glass surfaces.
FEATURES AND BENEFITS:
- Fast acting formula
- Safe on paint and glass
- Economical to use
DIRECTIONS:
Spray QFX-Tar n Glue directly onto the affected areas, allow to dissolve the tar deposits. Any residue can then be wiped away with a Microfibre cloth and rinse thoroughly using QFX-101 or Citrus Pre Wash.